• Skip to main content
  • Skip to primary sidebar
  • Skip to footer
800.669.8871
Documents ▼
  • About
  • Blog
  • Industries
  • Suppliers
  • Contact
  • Documents

Adhesive Solutions

Your #1 Source for Professional Quality Industrial Adhesives and Sprays

  • About
  • Blog
  • Suppliers
  • Industries
  • Contact
Home | Blog

Blog

VIRUCIDAL disinfectants available at Adhesive Solutions

May 13, 2020 By Alejandro Medina

As a response to help our customers fight COVID-19 and finding efficient sanitizing solutions to keep work places open and safe, we are offering the following products that can help you accomplish this. This products have EPA registration and can be used at Hospitals, Restaurants, Schools, Churches, Auditoriums, Warehouses, Gyms and everywhere you need to disinfect efficiently and fast.

Foster First Defense™ 40-80 Disinfectant by HB FULLER is an EPA registered, waterbased, quaternary ammonium chloride disinfectant.

*EPA registration number is 6836-152-63836.

Foster 40-80 Disinfectant has demonstrated effectiveness against viruses similar to coronavirus disease 2019, COVID-19 (SARS-CoV-2) on hard, non-porous surfaces. Therefore, Foster 40-80 First Defense™ Disinfectant can be used against coronavirus disease 2019, COVID-19 when used in accordance with the directions for use against Norovirus on hard, non-porous surfaces.

Foster® First DefenseTM Disinfectant (40-80) is a convenient, ready-to-use EPA Registered formulation that kills odor-causing bacteria and inhibits the growth of mold and mildew. This all-in-one “disinfectant, cleaner, fungicide, mildewstat, germicide and deodorizer”

Use Instructions:

APPLICATION CONSISTENCY:

Wipe, cloth, mop, sponge or coarse spray like water spray bottles. It can also be applied with Electrostatic Spraying Systems for maximum coverage.

ODOR:

Fresh Mild Scent

AVERAGE COVERAGE RANGE:

Dependent upon the method of application and the surface. Apply in sufficient quantity to ensure that the surface remains wet continuously for at least ten (10) minutes.

Buy it now at this link:

Foster First Defense™ 40-80 H.B. Fuller 5 gal pail

If you need further information please give us a call or use the contact form www.adhesivesolutions.com

Filed Under: Disinfectants Tagged With: COVID-19, Disinfectant Spray

New SCAQMD Rule 1168 regarding Top and Trim Adhesives

January 8, 2019 By Alejandro Medina

We, at Adhesives Solutions want to keep updated all of our Top and Trim Adhesive users and resellers about the new regulations for Top and Trim Adhesives effective January 1st 2019.

Rule 1168 is the rule governing the sale and usage of Adhesives and Sealants in the South Coast Air Quality District; you can download a copy through this link
https://www.arb.ca.gov/drdb/sc/curhtml/r1168.pdf

RULE 1168. ADHESIVE AND SEALANT APPLICATIONS

Purpose and Applicability:
The purpose of this rule is to reduce emissions of volatile organic compounds (VOCs), toxic air contaminants and stratospheric ozone-depleting compounds from the application of adhesives, adhesive primers, sealants and sealant primers.
This rule applies to any person who uses, sells, stores, supplies, distributes, offers for sale, or manufactures for sale any adhesives, adhesive primers, sealants, or sealant primers, unless otherwise specifically exempted by this rule.

[Read More]

Filed Under: Application

Recommended Spray Guns for Adhesives.

June 1, 2018 By Alejandro Medina

 

Recommended Spray Guns for Adhesives.

Throughout the many visits we make to different manufacturers here in California we’ve learned that the right choice of equipment can increase both the yield of adhesive and its overall performance. A good, high quality spray gun will help control the amount of glue dispensed, the width of the spray pattern and the air pressure recommended to avoid over spray and improve “open working time” to achieve the perfect bond between substrates every time.

Most spray guns are serviceable; meaning that the user will be able to perform cleaning activities as needed to keep the spray gun working as expected. Sometimes over cleaning might result in wear or break of the inner seals of the spray guns. Repair kits often include o rings and seals to bring back the equipment to “as new” condition.[Read More]

Filed Under: Application Tagged With: Adhesive Spray Guns, Anest Iwata, Binks

Laminating Adhesives

March 27, 2018 By Alejandro Medina

“Laminating Adhesives for Every Substrate”

Bonded substrates are used in automotive, furniture, mattress, packaging and myriad other industries.
We offer SPECTRUM Foam Stick II, a water base product that can be used as either a single part or 2-part adhesive for foam fabrication and SPECTRUM 6043 Water Base Contact Laminating Adhesive for bonding metal, wood and many other substrates. Also, for those wanting a fast set, long open time, solvent based product, we offer TECHNO 122, 155, 440 and 159 HVP (non-flammable) adhesives and Tensorbond C302 (non-flammable) and C307 CA Compliant Contact Adhesive.

The newest additions to our offering are a couple of products we’ve been selling for a few years – 72050 ultra-high performance foam laminating adhesive and LAM 300.

72050 is an ultra-high performance water based product for those applying adhesive through heated, roll-coat equipment to bond a variety of substrates (foam, scrim, vinyl, etc.).

 

[Read More]

Filed Under: Adhesive, Application Tagged With: Laminating Adhesives, laminating foam adhesive, roll coated adhesive

Cold Weather and Tensorgrip Canister Adhesives

November 27, 2017 By Steve Bayliff

 

With winter upon us in a large portion of North America, cold temperatures can potentially change the physical properties of adhesives. Thus, it’s a good idea to pay closer attention to the signs associated with cooler temperatures that will impact canister adhesives like P307, P313, P329 and P302 performance.

[Read More]

Filed Under: Canisters Tagged With: canister, canister spray adhesive, tensorgrip, web spray

Hot melt adhesives by Warren Adhesives available through Adhesive Solutions.

September 8, 2017 By Alejandro Medina

Hot melt adhesives are widely used in the packaging Industry, case and crating manufacturing, mattress and foam fabrication and other Industries. Hot Melts are the most cost efficient adhesive when compared by weight to liquid adhesives for the simple fact that they are 100% solids – everything applied is use.

Hot Melts are applied typically only on one side of the substrates to bond, either in beads or with air forming a swirl pattern which improves square coverage and reduces telegraphing.

Hot Melts are not regulated by the Air Quality Districts.
There is no need for special warehousing and they have a very long shelf life.

[Read More]

Filed Under: Adhesive Tagged With: Hot Melt, Hot Melt Application, Hot Melt Technologies, Warren Adhesives, Warren Hot Melt

  • Go to page 1
  • Go to page 2
  • Go to Next Page »

sidebar

Page Sidebar

Recent Posts

  • VIRUCIDAL disinfectants available at Adhesive Solutions
  • New SCAQMD Rule 1168 regarding Top and Trim Adhesives
  • Recommended Spray Guns for Adhesives.
  • Laminating Adhesives
  • Cold Weather and Tensorgrip Canister Adhesives

Categories

  • Adhesive
  • Application
  • Canisters
  • Disinfectants

Footer

Need help finding the right solution? Call 800.669.8871 or contact us online

©2023, Adhesive Solutions, Inc
  • About
  • Blog
  • Suppliers
  • Industries
  • Contact
800.669.8871
10106 Romandel Ave, Santa Fe Springs, CA 90670