• Skip to main content
  • Skip to footer
800.669.8871
Documents ▼
  • About
  • Blog
  • Industries
  • Suppliers
  • Contact
  • Documents

Adhesive Solutions

Your #1 Source for Professional Quality Industrial Adhesives and Sprays

  • About
  • Blog
  • Suppliers
  • Industries
  • Contact
Home | Display / Exhibits | Aerosols

Aerosols

V & S Aerosol Spray Adhesives

V&S offers a complete line of aerosol adhesives for every industry. This Aerosol Adhesives dispense a “controlled lace” spray pattern that reduces “overspray”.  This spray pattern allows the user to see exactly where the spray adhesive is going and how much is being applied. 

Basic Directions 

1. Use only in a well-ventilated area.  2. Make sure surfaces are free of dirt, grease and moisture.  3. Shake can well before use.  4. If possible, mask off any area not applied with adhesive (this will also help in clean-up).  5. Hold can upright about 6″ to 8″ away from surface.  6. Test spray pattern in a protected area away from project surfaces.  7. Spray with a light, uniform coat.  8. When can I make the bond? We suggest that you use your fingers if it feels sticky, but doesn’t transfer to your fingers, it’s ready to bond.  9. To help prevent clogged nozzles after use, tip can upside down and spray until adhesive does not emit.

Home / Industries / Display / Exhibits / Aerosols
  • 1077 V&S Mist Spray Adhesive

  • 781 V&S Dry Silicone Spray

  • DAP® Weldwood® Contact Cement Original Spray Adhesive

  • P307AA Tensorgrip Low VOC Aerosol Contact Adhesive

  • Tensorgrip® X60AA CA Compliant Acoustic Panel Spray Adhesive

Showing all 5 results

Footer

Need help finding the right solution? Call 800.669.8871 or contact us online

©2023, Adhesive Solutions, Inc
  • About
  • Blog
  • Suppliers
  • Industries
  • Contact
800.669.8871
10106 Romandel Ave, Santa Fe Springs, CA 90670