Description

TensorGrip® – G67 Water Based Pressure Sensitive Flooring Adhesive

TensorGrip G67 is a water-based, pressure sensitive flooring adhesive designed to spray from a portable canister system. TensorGrip G67 can be used for carpet tile, vinyl tile, vinyl plank, and underlayment, and allows substrate to be laid into the wet adhesive without giving a permanent bond when dried.

To watch a demo and learn more about TensorGrip G67, click here.

• Advantages:
• Ready for traffic immediately
• Cut installation time by up to 70%
• Water based adhesive
• No outside power source required
• Quick drying with long open time
• Portable system
• Non-flammable
• Ergonomic
• High application speed: 200 sq ft (small áreas) per min
  800 sq ft (large areas) per min
• Excellent adhesion on most types of carpet tiles and LVT/LVP
• Repositionable during installation
• Can be wet laid – ensure that at least one surface to be bonded is porous, such as wood or concrete
• Resistant to plasticizer migration – great for PVC, carpet tiles
• Extremely high coverage, one 22 liter canister equivalent to 8-10 pails

Canister System Usage: When hose is connected, keep canister valve open and hose pressurized at all times. Do not disconnect the hose until ready to connect to new canister. Release pressure in hose before disconnecting from canister. If gun and hose must be stored unattached to pressurized canister, they may be cleaned for future use by attaching to canister of 609 Citrus cleaner and flushing until clear.

VOC Content: 0 g/L
Appearance: White/Off-White
Flammability: Non-Flam propellant & water based
Dry Time (min) 1-10 depending on atmospheric conditions
Open time: 4+ hours, depending on conditions
pH rating: 11
Shelf Life: 12 Months
Coverage: Carpet Tile – 6,000 sq ft / 666 sq yd per 22L
LVT/LVP – 4,000 sq ft / 444 sq yd per 22L

Available in 22L and 7L Canister